|
|
|
Features:
Enhanced 80C51 Central Processing Unit ,1T per machine cycle, faster 6~7 times than the rate of
a standard 8051.
Operating voltage range: 5.5V ~ 3.5V or 2.2V ~ 3.6V (STC12LE5A60S2).
Operating frequency range: 0- 35MHz, is equivalent to standard 8051:0~420MHz
On-chip 8/16/20/32/40/48/52/56/60/62K FLASH program memory with flexible ISP/IAP capability
On-chip 1280 byte RAM: 256 byte scratch-pad RAM and 1024 bytes of auxiliary RAM
Be capable of addressing up to 64K byte of external RAM
Dual Data Pointer (DPTR) to speed up data movement
Code protection for flash memory access
Excellent noise immunity, very low power consumption
four 16-bit timer/counter, be compatible with Timer0/Timer1 of standard 8051, 2-channel PCA
can be available as two timers.
10 vector-address, 4 level priority interrupt capability
One enhanced UART with hardware address-recognition and frame-error detection function
Secondary UART with self baud-rate generator
One 15 bits Watch-Dog-Timer with 8-bit pre-scaler (one-time-enabled)
SPI Master/Slave communication interface
Two channel Programmable Counter Array (PCA)
10-bit, 8-channel Analog-to-Digital Converter (ADC)
Simple internal RC oscillator and external crystal clock
Power control: idle mode(all interrupt can wake up IDLE mode) , power-down mode(external interrupt can wake up Power-Down mode) and slow down mode
Power down mode can be woken-up by PCA_pin, RXD_pin, T0/T1 pin and external interrupts (INT0, INT1)
44/40/36 programmable I/O ports are available
Programmable clock output Function. T0 output the clock on P3.4,T1 output the clock on P3.5,BRT output the clock on P1.0
External low-voltage detector function(P4.6, the EA pin at the pin location of standard 8051)
Five package type : LQFP-44, LQFP-48 ,PDIP-40, PLCC-44,QFN-40
Product Documents:
General Overview: STC12C5A60S2_Features.pdf
Data Sheet: STC12C5A60S2.pdf
ROSH��
Product Support:
ר����¼�����
ISP programming software :STC ISP programming software (v6.86) |
|
